blog-banner

New Generation Plumbing Blogs

Learn more about plumbing tips

hacks and more with New Generation Plumbing

facebook twitter googlr+

Blog

How to Detect a Plumbing Leak

Severe plumbing problems can be easily overlooked, especially if you don’t know how to identify plumbing issues. Some plumbing problems are easy to fix while others can lead to serious damage and major financial liability. To save time and money, our guide will outline the best ways to detect plumbing leaks.

For more helpful plumbing tips and services from a professional plumbing service in Los Angeles, contact New Generation Plumbing.

Water Meter

The best way to check if you have a leak in your plumbing system is to check your water meter. If you do not know where your meter is located, you can call the billing department in your district to get your meter location.

• Make sure no water is on inside or outside of your house.
• Locate your water meter and check the leak indicator to see if it is moving. If the dial in the meter is moving, chances are, you have a leak.
• You can also take a meter reading and wait 1 or hours and take another meter reading. During this time, make sure no water is used. If the reading changes, you have a leak.

If you identify a leak in the house, the next step is to determine if the leak is inside or outside the house. Once identified, locate your home’s main shut off for the water supply that’s causing the issue. This is usually located at the valve at the base of behind your commode. If you cannot locate this, just turn off the main water valve – typically located in the basement or outside your house. In larger emergencies such as flooding, you’ll want to turn off the main valve right away. To turn off the valve, most water valves will require you to turn the knob clockwise to shut off.

Leaking Faucets

If you have a leaking faucet, the cause is likely due to worn rubber washer. The washer on a sink is usually located under the handle. This typically requires replacement, which will require shutting off the water under the sink or at the main valve and removing the handle.

Leaking Toilets

Toilet leaks, even the smallest leaks, can add up to a lot of wasted water and money over time. To help determine if you have a leaking toilet, remove the tank lid and place a few drops of food coloring in back of the toilet tank. Wait about 30 minutes, without flushing, and then look in the toilet bowl. If the color is clear, water is not leaking. If you see food coloring in the blow, you have a leak.

In most cases, you will need to replace the toilet flapper or filling mechanism. If you aren’t familiar how to, call your plumber for professional service.

Other Water Leaks

Some leaks can be very obvious while others are silent. Wastewater, for example, is usually moved by gravity and is not under pressure. This makes wastewater leaks much harder to detect. If you suspect wastewater leak, call your Maintenance and Operations department for help.

Other ways to identify leaks include wet, warped or discoloration stains on your ceilings, floors, walls and woodwork.

Professional Plumbing Service in Los Angeles

Our plumbing technicians will assist you in targeting and treating the plumbing problem at hand. Conveniently located in Highland Park, our licensed and insured plumbing contractors readily serve clients in Northeast Los Angeles, San Gabriel Valley and San Rafael Hills with distinction. We service the cities of Highland Park, Pasadena, Eagle Rock, Altadena, and all of Northeast Los Angeles and San Gabriel Valley.

New Generation Plumbing is a premier plumbing service in Los Angeles ready to service all your plumbing needs. We offer a variety of specials, so you never have to pay more. Schedule your service today for a free estimate with appointment, 24/7 emergency repair service, licensed and certified technicians and a 90-day warranty on all replacement parts.

Most Common Home Sewer Problems

The sewer line is the largest drain in your home so it’s no surprise that it is susceptible to a number of problems. For any serious plumbing problem, it is strongly advised that you seek out a professional plumber in Los Angeles, such as New Generation Plumbing for a state of the art solution. The most common problems include the following:

Tree roots. When tree roots infiltrate your sewer line, they can quickly damage and cause further damage in a short time frame. This is most common in an older home.
Broken, collapsed, cracked or misaligned pipes. Frozen ground or shifting soil can lead to broken, collapsed, cracked or misaligned pipes, weakening the sewage pipelines and structure.
Blockage. A buildup of grease or some other object restricts proper water flow in the sewage pipes and result in water backing up out of a drain or the toilet plumbing.
Pipe corrosion or deterioration. Older pipes or pipes made of anything other than PVC piping are at risk of having pipe deterioration, which can cause collapses in the line and a restriction in proper water flow.
Bellied pipe. When a section of the pipe has sunk into the ground, it creates an area for waste to converge.
Leaking joints. When the seals between the pipes are broken, then water can easily escape into the area surrounding the pipeline.

How to Prevent Common Home Sewer Problems

There are various problems that can affect a sewer line. To prevent future home sewer problems from occurring, make sure to schedule a septic tank inspection every three to five years. Make sure to select a license and insured plumber to carefully inspect your septic system for signs of breaks or cracks.

For everyday prevention, regular maintenance and proper use of your drains is the best practice. Here are a few tips that will help keep your sewer line clear of problems.

Don’t use your toilet as a waste basket. Common sources of clogging include feminine hygiene products, paper towels, napkins, diapers, and facial tissues down your toilet.
Use your garbage disposal wisely. Avoid dumpling large quantities of any food particles in your garbage disposal. Dispose what you can in the waste basket and dispose of remaining particles in the disposal to minimize anything lodged within your sewer line.
Don’t pour grease down your drain. While liquids can easily pass through your drain, grease and fat can harden within your plumbing, collecting debris and creating a clog.
Use the drain cleaner for designated pipes. When it comes to draining cleaners, be cautious. Most commercial drain cleaning products are safe to use on bathroom and kitchen sinks as well as tubs and showers, but toilets can be damaged if you use the wrong type of cleaner. To avoid these problems with drain cleaners, make sure to carefully read all labels before use.

Schedule Your Service Today

Sewer plumbing is a specialty field within the plumbing industry. It is recommended that only highly skilled, licensed and insured sewer contractors should be used for corrective and preventive work for home sewer problems.

Our plumbing technicians will assist you in targeting and treating the plumbing problem at hand. Conveniently located in Highland Park, our licensed and insured plumbing contractors readily serve clients in Northeast Los Angeles, San Gabriel Valley and San Rafael Hills with distinction. We service the cities of Highland Park, Pasadena, Eagle Rock, Altadena, and all of Northeast Los Angeles and San Gabriel Valley.

Professional Plumber in Los Angeles

New Generation Plumbing is a premier plumbing company ready to service all your plumbing needs. We offer a variety of specials, so you never have to pay more. If you are interested in the top professional plumber in Los Angeles, schedule your service today for a free estimate with appointment, 24/7 emergency repair service, licensed and certified technicians and a 90-day warranty on all replacement parts.

Which Type of Kitchen Faucet is Right for You?

Faucets are functional and outspoken. They speak to the person’s taste and style particularly in the heart of the home: your kitchen. Your kitchen is the center for entertainment, dining and everyday functionality. It is the command center of all family functions and where everyone congregates so it’s important that your installation and finish to your kitchen is complete with style and practical use.

Before choosing kitchen faucets, you’ll need to consider a few factors, such as whether you’re using the existing sink or buying a new one and what features you want. You’ll also need to consider how much your budget allows and the size of your kitchen.

If you still haven’t decided, let us give you a short handy guide to choosing the right type of faucet for your kitchen.

Mounting Styles

There are 3 primary mounting styles to consider: sink-mounted faucets, deck-mounted faucets and wall-mounted faucets. Before choosing one, check how many mounting holes your existing sink has. New faucets come in one-, two-, three- or four- hole varieties.

Sink-mounted faucets are a great option if you need a quick kitchen update and want to reuse your existing sink. If design is important, this option will limit your faucet style options.

Deck-mounted faucets are mounted directly to the countertop and not the sink. This option provides a seamless look that’s best for contemporary kitchens. If space is a limitation, this option is not recommended as it occupies space on the countertop.

Wall-mounted faucets are placed on the wall adjacent to the sink. This option allows for easy cleanup, but requires more tedious relocation and installation. For colder climates, you’ll need to check with local codes for installation on an outside wall to insulate against freezing. For installation, your professional sewer and rooter service in Los Angeles will also need to measure the spacing and location to make sure the faucet and handles can be installed where you need them.

Handle Options

There are 3 primary handle options. Think about how you use your faucet every day and decide if one-handle, two-handle or a hands-free option suits your needs.

Single-handled faucets rotate directionally, providing the ability to regulate water flow and pressure from an up-and-down motion and side-to-side motion. This option is convenient when you only have one hand free. On the other hand, temperature adjustments are less precise than two-handle faucets.

Two-handle faucets usually require a minimum of three holes for installation. This option has dedicated hot and cold-water handles, allowing for more precision in temperature adjustments and water pressure and flow. On the other hand, this option limits you style-wise as it is more traditional.

Hands-free faucets are motion-activated. This option operates with a sensor that detects light contact. They are great for full hands, arthritic hands and children. They are also eco-friendly as it shuts off automatically to conserve water. On the other hand, this option does not allow for temperature adjustments by hand. It must be done manually, which can aggravate some homeowners.

Finishing Touches

Materials and color tones complete your kitchen finishes. This can be in chrome, brushed nickel, polished brass, oil-rubbed bronze, white, black and/or stainless steel. The options are endless.

Keep in mind that finishes vary by manufacturers. It’s a good idea to purchase the same collection from manufacturers to ensure a good match in style, price and quality.

For style, work with your designer to identify your personality and taste for kitchen aesthetics. Does your kitchen have a sleek and contemporary or rustic visual interest? Does it need simple, clean lines or angular detailing?

For price and quality, stainless steel or brass base materials will be more durable and costlier than its plastic counterparts. Remember that lower-priced faucets are often made with plastic parts that don’t hold up. When investing in kitchen parts, consider costs of replacements and plumber fees that may negate the savings.

Sewer and Rooter Service in Los Angeles

New Generation Plumbing is a premier sewer and rooter service in Los Angeles ready to service all your plumbing needs. We offer a variety of specials so you never have to pay more. Schedule your service today for a free estimate with appointment, 24/7 emergency repair service, licensed and certified technicians and a 90-day warranty on all replacement parts.

Most Common Plumbing Mistakes

Plumbing Mistake #1: Vents and Traps

Basement fixtures need to have appropriate vents. Check your local or state building code. It is also important to add a vent to every trap. When there is no trap, water can be siphoned out, leaving the trap dry and useless. Remember not to use an S-trap for the sink drain; a P-trap is the right one for this application.

Plumbing Mistake #2: High Slopes

If you think having a higher slope is a good idea, think again. A high slope means that liquids will move faster than solid, leaving solids behind causing major issues later during normal operations. Ideally, ¼ inch per feet should be enough.

Plumbing Mistake #3: Not Turning Off the Water

If a pipe has a leak or if you’re pressed for time, it’s easy to forget to shut off the water. No matter how minor the repair and no matter where it is in a home, always shut off the water before attempting a repair. This will minimize extra damage to pipes as you reconnect them before more water escapes.

Plumbing Mistake #4: Improper Clean Outs

Often, the cleanouts are in the wrong location. It is important to have the required clearance to service the line when it gets clogged.

Clean outs are not required by code above the first floor but you might want to consider how the line was designed and add some cleanout just to facilitate servicing the line. Clean outs are also required at the base of each sanitary stack.

Plumbing Mistake #5: Space Around Toilets

You need enough clearance space. Toilets must be at least 15 inches from the side wall and at least 18 inches from the wall in front of the equipment. It must also be located at least 18 inches from the front wall.

Plumbing Mistake #6: Pressure Relief Valves

When it comes to pressure relief valances, the drain line must be a full-size pipe, sloped to drain without valves between the drain and the outlet. The fitting must be located at the end of the line, and not contain any thread. The distance from the floor should also be carefully observed.

Plumbing Mistake #7: Matching Pipes

Matching pipes is a commonly repeated mistake that can lead to serious plumbing problems. For example, a galvanized metal pipe cannot be connected to a copper pipe because these materials will interact with each other, and will corrode very quickly.

Plumbing Mistake #8: Using Too Much Drain Cleaner

Commercial drain cleaners are great at clearing away clogs and getting rid of built-up residue, but be careful of using too much or too often. Drain cleaners typically included harsh chemicals that break up solid waste and scour pipes clean; overuse can eat way the walls of the metal and PVC pipes.

Plumbing Mistake #9: Using Drain Cleaner in the Wrong Places

When it comes to draining cleaners, be cautious. Most commercial drain cleaning products are safe to use on bathroom and kitchen sinks as well as tubs and showers, but toilets can be damaged if you use the wrong type of cleaner. To avoid these problems with drain cleaners, make sure to carefully read all labels before use.

Plumbing Mistake #10: Leaving an Outside Hose Connected in Winter

During the winter months, if a hose is left connected to an outside faucet, it can cause your water lines to freeze and burst. If this happens in your house, this could lead to thousands of dollars in water damage before you notice any symptoms. To avoid this problem, always disconnect your outside hoses before the winter months.

Plumbing Mistake #11: Not Hiring a Professional Plumber

There are some common plumbing mistakes you can easily fix (i.e. installing a new faucet, making minor repairs to a toilet or dealing with minor pipe blockages). But any extensive common plumbing mistakes should be left to a plumber. While the cost of hiring a professional will be more than the materials of your DIY effort, the money paid is assured by the experience and accuracy.

For all your plumbing needs and serious repairs to common plumbing mistakes, trust in the professionals at New Generation Plumbing.

Why is Water Coming Up Through Your Sink?

Water coming up through the sink is never fun or pleasant, but clogged drains and water backed up in the sink is the most common plumbing problem that most people face. It’s usually nothing major, but it’s helpful to know what might be causing the drain to clog and how to fix a clogged sink.

Common Causes

A red flag that your sink may be getting clogged is when the water drains very slowly. There are a number of reasons that might cause the water in the sink to back up. Below are some of the common causes of water coming up through the sink. Once you have a handle on the causes you can begin to go about fixing a clogged sink.

• Food – Food is, by far, one of the most common causes of clogged drains. Many people dump leftover pieces of food, peels, egg shells, and other food particles down the drain. Even if you have a garbage disposal, these things can still build up and clog the drain over time.

• Grease and Oil – Some people pour leftover grease and oil down the sink. These things can solidify as they get cold and over time, which then leaves build up with other things blocking the plumbing and causing the sink to back up.

• Hair – More common in the bathroom sink, hair can cause a lot of problems when it comes to backing up the sink.

• Roots – Roots tend to be a bigger issue with clogging the toilet and bathtub plumbing since those pipes tend to go right into the ground, but roots can grow into the plumbing and cause blockages typically closer to where the plumbing hits the ground).

• Soap Scum and Other Bathroom Products – Have you ever seen that hard white gunk that ends up on the sides of the faucets and in and around the shower door and drain? That’s soap scum and it can also build up in the sink and bathtub. Additionally, other bathroom products such as toothpaste, hair products and even floss can end up down the sink and wreak havoc on proper drainage.

Fixing a Clogged Sink

There’s really only a few things that you can do on your own to unclog a backed-up sink before having to call a professional for help. Here are just a few things you can to fix a clogged sink.

Warm Water & Vinegar

Before trying some of the methods, try putting a mixture of warm water and vinegar down the drain to see if that helps clean up and clear the plumbing. There are some liquid chemical drain cleaners, but these be ineffective and then expose yourself (or a plumber) to the chemicals.

Use a Plunger

The sink should be filled up partway with some water before placing a plunger over the opening of the drain. Similar to plunging a toilet, you will want to thrust the center of the plunger. This pushes a pocket of air from the plunger down into the drain, hopefully pushing any particles that may be blocking the drain down and through, clearing the pathway for the water to drain freely.

Try a Snake

A drain snake, also known as an auger, is helpful for placing a long wire down the drain and pushing through anything that may be blocking the sink. Sometimes it can even pull back up things, such as hair or other things blocking the plumbing. There are a variety of snakes that you can get to use to fix a common clogged sink. They are typically sold at a home improvement store, near the plungers!

Call a Professional

When the above methods fail, it’s time to call in the professionals. Plumbers are experienced with even the most complicated of clogged drains and can ensure proper removal of whatever is clogging the sink!

It is also important to note here that, for your safety, never try placing your fingers or hand down the sink to pull anything out, especially if there’s a garbage disposal. If you aren’t sure if there’s a garbage disposal, don’t take your chances! These result in some of the most horrific accidents!

How to Prevent a Clogged Sink

One of the best things you can do following a clogged sink is to try and prevent it from happening in the first place. Whether you have had a sink that’s backed up or not, knowing some of these good habits for preventing plumbing problems in the first place can help you save a lot of time, money and headaches down the road!

• Scrape any leftovers and place peels and other items in the trash instead of down the kitchen sink.

• Put strainers in the opening of the sink drain to prevent larger particles from going down the drain and clogging the plumbing.

• Never put leftover grease or oil down the drain. Not only does this risk potential plumbing issues, but keep in mind where your waste may end up!

• When showering or doing your hair in the bathroom, avoid large clumps of hair from going down the drain (again, a strainer can help to catch a lot of hair).

Contact Us

If you are located in and around the Los Angeles area and need a professional to help you unclog the sink or for any other plumbing needs, contact New Generation Plumbing today at 323-274-4863. The experienced professionals at New Generation Plumbing will help ensure that your clogged sink is up and running right away and a thing of the past!

What is a Rooter Service?

The rooter service method was created to target roots in plumbing that disrupted drain flowage. Although the rooter service was originally intended to rid drains of roots and other natural intrusions, it is also used to clear pesky clogs. Many different forms of blockage can all be cleared fast and efficiently with New Generation Plumbing’s rooter service.

Our team of expert plumbers are meticulously trained to use our rooter machine to clear drains of natural causes and unruly debris. We use the only the best rooter tool to clean your drains of pesky buildup. Failing to address these problems can result in even more costly problems down the road. Here is what you need to know about rooter services.

What is a Rooter?

Drains are used every single day within a household. With daily use, drains can become clogged from excess build up. Along with clogs within the drains, nature can also interfere with your drain usage. A rooter is a drain cleaning machine that was designed to unblock drains that have been clogged from tree roots and other hard-to-reach debris. Rooters are used to clean drains with long motorized blades that cut and rid drains of debris or roots.

Why are There Roots in my Pipes?

Drier weather conditions often cause plant roots to travel long distances in search of moisture. If your pipes have any cracks or leaks, the water vapor trail will cause roots to start penetrating the pipes in order to reach the water.

Why are Roots in Plumbing Bad?

This could lead to a reduced flow and slow drains. In most cases the roots lead to a complete blockage. This is because the roots quickly start to act as a net by catching all the grease and other waste from your household, which is why it is important to keep your drains clean if you suspect that you have roots in your plumbing. Also, once the roots enter the pipes through the cracks or other openings, the pipes are prone to break as a result of the intensified pressure.

What Can I do if my Drains are Clogged?

Many people will reach straight for harsh acidic chemicals to remove blockages. However, these are not always recommended. The chemicals can cause damage to your pipes and ultimately cause even more problems in the long run. It is best to make use of professional drain cleaning and rooter services. Especially when the blockage is caused by plant roots.

What do Rooter Services Entail?

Our drain cleaning professionals can clear your drains in one of two ways. The first technique is to snake the drain as much as possible and then to use chemicals to clear the remaining debris and to speed up the decomposition of any dead roots. However, these chemicals can often be harmful to the environment. Therefore, a new method has developed, called hydro jetting or hydro scrubbing. Water is forced through the pipes using varying amounts of pressure, in order to clear the pipes and scrub away any built-up debris on the walls of the pipes. This method is quick, effective, economic and also friendly to the environment. Then, the plumber will use a rooter machine to break up the roots in plumbing and get them out. It is important that an experienced professional is always in control of this machine because it is possible to damage your pipes more if it is not used correctly.

New Generation Plumbing

At New Generation Plumbing, we offer only the best and most reasonable pricing we can because our client relationships are number one. Our customer service is consistently honest, trustworthy and fast. We meticulously train all of our plumbing experts on all services offered.
Contact us today if you have a plumbing question, concern or job. We will come right out and assess the situation with ease. We have emergency services for urgent matters. We know plumbing problems come at any and all times, do not hesitate to contact us. Don’t let these pesky problems ruin your day, New Generation Plumbing is here to solve them.

How Do You Know if You Need a New Water Heater?

In-home access to hot water may not have always been a luxury (or even possibility) for the average family, but today it’s an essential part of daily life. Nowadays, a broken water heater is a major inconvenience at best and at worst can cause thousands of dollars in damages. It can also be difficult to know that your water heater is having problems before disaster strikes and repair, especially for an older water heater, is not always an option. Fortunately, Nautilus Plumbing has your back with a few telltale signs that you may need to start looking for a new water heater.

Age

It may seem like determining the age of your water heater could be difficult or even impossible, especially if it was already installed when you purchased your property, but there is an easy method to find out exactly how old your water heater is, all the way down to the month. Simply look for the manufacturer’s sticker on the top portion of your water heater, then identify the serial number on the sticker. The serial number should look something like this: “F051052638.” F represents the month, but don’t get confused, it’s not referring to February. F is the sixth letter of the alphabet, so it’s referring to the sixth month of the year, June. The next two digits tell you the year that your water heater was manufactured in. So, this water heater was manufactured in June of 2005. Codes may vary between manufacturers, so check your water heater’s manufacturer’s website to make sure you’re interpreting the serial number correctly.

Water heaters are generally recommended for replacement every 10 years, but depending on the type this can vary from 6 to 12 years. If your water heater has reached the end of its predicted lifespan and is in a place where it could cause serious damage to your home or business should it fail, it should probably be replaced. On the other hand, if your water heater is not showing any other signs of a problem and is in a place where it the only damage it will cause if it breaks is the inconvenience of replacement, you may want to hold off on replacing it, depending on your property’s hot water needs.

Ineffectiveness

The whole point of a new water heater is to, obviously, heat up your water, so if your water heater is no longer doing this effectively then it may be time to replace it. Ineffective water heating can manifest in water not getting hot enough, inconsistency in the heat of the water coming out of your faucets and showerheads, and quickly running out of hot water. This is often the result of a pilot light that’s gone out, so don’t panic before checking it, but in many cases, this is the result of a dirty water heater, not a failing one, but a dirty water heater can fail without proper action. As your water heater does its job, the minerals in the water separate and sink to the bottom of the tank where they build up and form a barrier between the burner and the water in the tank. As the heater works harder to get the water hot, the heater strains, eventually leading to the tank or control failing.

You can have your water heater cleaned annually by a licensed plumber. It can be tempting to try a do it yourself solution, but an unlicensed person risks damaging their water heater further, causing their heater to go from just dirty to needing replacement.

Noise

Is your water heater making rumbling, crackling, hissing, sizzling, or popping noises, particularly while it’s heating up? This is a pretty sure sign that your water heater is nearing the end of its road and needs replacing soon, likely due to the sediment build up we have just discussed. These noises are made when the heating elements strain to heat up the water, causing the tank to overheat and the metal of the tank to fatigue, and leading to its eventual failure. In some cases, just having the water heater flushed and cleaned is enough to keep it functional for a few more years with careful maintenance, but often your best bet is to simply replace the water heater rather than risking catastrophe when your water heater eventually fails.

Weird Taste, Smell, or Appearance

Even pleasantly hot water isn’t very helpful if it has an unusual odor, unpleasant taste, or unappealing appearance. Cloudy water with a metallic taste or strange odor can indicate that those mineral deposits have made their way out of the water heater and are traveling through other parts of your plumbing. Eventually this can clog the screens of the aerators in your faucet and impede water flow. Rusty water can indicate the depletion of your water heater’s anode rod, which is used to prevent corrosion. Once the anode rod is gone, the tank itself begins to corrode instead. However, rust can also indicate rusty pipes, so have a plumber examine your water system before making major decisions.

Plumbing Solution in Los Angeles

New Generation Plumbing is Los Angeles’s most honest and affordable plumbing company. For over 50 years, our licensed plumbers have been servicing both residential and commercial properties. If you live in Downtown Los Angeles, Beverly Hills, Hollywood, Culver City, Marina Del Ray, Pasadena or the Valley, New Generation Plumbing is the only choice for your plumbing needs. Whether you are interested in a new tankless water heater, a traditional new water heater, or any other plumbing need, contact New Generation Plumbing to get your plumbing needs taken care of.

Top 5 Plumbing Mistakes

Households depend on plumbing every day. The average American family uses around 400 gallons of water per day, according to the United States Environmental Protection Agency. 70% of water is used indoors which encompasses all kitchen, washing machine and bathroom water useage. Households depend heavily on the these areas of the home every day. Functionality is key when it comes to household plumbing. Over time, mistakes can be made that can bring these home essentials to a halt. It is important to stay educated on your plumbing system to avoid future problems. No one ever intends on having surprise plumbing problems. Surprises are only enjoyable when you’re at a birthday party. Plumbing blunders are never a party scenario. Here are some of the top plumbing mistakes that may take some homeowners by surprise.

Harmful Household Items Down the Drain

First off, drains are crucial part of a functioning plumbing system. Homeowners may face trouble when they put harmful products down their drains. Household drainage systems can be damaged by range of different harmful household items. Fruit and vegetable peelings, coffee grounds, grease, fats and oils are some of the leading causes of clogged drains. Through daily bathroom use, drains can become clogged by hair products, soaps, oils, flushable wipes, cotton balls and even medications. All items listed are essentially on the “No-Fly list” of your household’s drainage system. Keep your drains happy by throwing all these items in the trash and not your drains!

Harsh Drain Cleaners

Drain cleaners were created to clear your drains. Misuse and overuse are two factors that can transform helpful drain cleaners into the drainage system’s enemy number one. Some homeowners armed with drain cleaner can present a dangerous situation. Drain cleaners are made of harsh chemicals meant to break down and clear drain buildup. Often times, the cleaner’s harsh properties can wear drains down. If the blockage is a partial clog, the drain cleaner might glide right by the clog and ignore the problem. It is much more effective to invest in a professional job, than to blindly pour chemicals down the drain.

Mistreating Plumbing Fixtures

People often mistreat their fixtures. Faucets typically take the brunt of the abuse with daily kitchen and bathroom use. Repeated pushing and pulling on a faucet handle can create leaks over time. Shower heads also feel the pressure as shower caddies pull down on the fixture. The weight of shampoos and other heavy shower products can weigh down the shower head and potentially break it right off. Treat your plumbing fixtures with care can prolong their use and negate future plumbing issues.

Ignoring Plumbing Problems

It is common for households to ignore plumbing problems, but this only leads to more costly expenses down the line. A small leak can soon become a larger leak, if left unaddressed. Problems will worsen with time. Any plumbing complications are cause for concern. Don’t wait for a problem to disappear. At New Generation Plumbing, we believe in addressing plumbing issues head on with a professional. Get the job done correctly with one of our trained plumbing specialists today.

At Home Plumbing Jobs

Many times at home plumbing jobs can make a problem worse. Do it yourself plumbing is rarely a good idea. Certain jobs can be more complicated than initially presumed. Plumbing pipes and fixtures have many pieces which can cause confusion when putting them back together. This may present a difficult task for those not trained or educated in the field. Some may think they are saving money by embarking on their own plumbing journey, but errors and mistakes may create a much worse situation. Skip the hassle and call New Generation’s plumbing experts to help you with your plumbing problems.